SimPure T1-400UV Tankless Reverse Osmosis Water Filter System Replacement Filter Cartridge Pack (2-Year Supply)

Revised Content:

From the Brand: Previous page | More | Filter For Your Choice | Visit the Store | Next page

Product Description Workflow: Tap water passes through the PP Filter and CTO Filter, becoming primary purified water. A built-in booster pump then pressurizes this water to 60-110 PSI, which can be checked on the water pressure gauge. After the RO Filter, T33 Filter, ALK Filter, and UV sterilization filtration, the water becomes pure and ready for drinking, while the wastewater flows out through the other end.

Determining Filter Replacement: 1. When the tap water temperature and pressure are normal (generally 40-104°F, 15-70 PSI): - If the flow of pure water is less than 0.5L/min, the filter cartridges need to be replaced (The flow rate may be slightly higher in summer than in winter). - Check the water pressure gauge reading before the RO filter (generally 60-110 PSI). If it exceeds 130 PSI and the wastewater valve is not blocked, replace the RO Filter, followed by the T33 Filter. - If the tap water pressure is 40 PSI, but the water pressure gauge shows much lower, replace the PP Filter, followed by the CTO Filter.

Recommendations: - The T33 filter is suitable for T1-400UV, and the ALK filter is suitable for T1-400ALK. - The RO/CTO/PP Filters are suitable for the T1-400 series, including both T1-400UV and T1-400ALK. - Replace the PP, CTO, ALK, and T33 filters every 3-6 months. - Replace the RO membrane every 12 months. - The actual service life depends on water consumption and quality.

1-Year Replacement Set - Individually wrapped 1-Year high-capacity filter replacement cartridge pack for SimPure T1-400UV, including: - 1 RO Filter - 2 PP Filter - 2 CTO Filter - 2 T33 Filter

Filter Specifications: - PP Filter: Removes contaminants 1 micron or greater, including sediment, rust, silt, sand, iron, moss, pollen, protozoa, and other organisms. - CTO Filter: Removes contaminants 0.1 microns or greater, including taste, odors, similar contaminants, and adsorbing chemicals such as carbon tetrachloride and chlorine. - RO Filter: Removes contaminants 0.0001 microns or greater, including metal ions, impurities, heavy metals, colors, and dissolved solids, allowing only water molecules to pass through. - T33 Filter: Adds coconut-grade activated granular carbon to improve water taste, remove organic chemicals, unpleasant odors or tastes, and trace metal ions. - ALK Filter: Produces alkaline pH+ water.

product information: